Supply drop in anchors factory quotes
- NEWSTARWDH
- CHINA
- 7-35 DAYS
- 1000 TONS
1. It has extremely high load carrying capacity, anti-fatigue, anti-vibration, safe and reliable.
2. The expansion stress is small, suitable for installation and fixing of small margins and small distances.
3. It is suitable for all special environments where it is not suitable for planting or not using chemical anchors.
4. The anchor bolt has obvious installation scale and is easy to install.
Drop In Anchors
Material: Carbon Steel, Alloy Steel, Stainless Steel
Measurement system: INCH, Metric
Size: M6 - M20 , 1/4'' - 3/4''
Thread: M, UNC, UNF
Finish: Black Oxide, Zinc Plated(Clear/Blue/Yellow/Black),H.D.G , Y.Z.P ,Plain, Nickel, Chrome.
Description
Place of origin | China(Mainland) |
Brand Name | NEWSTARWDH |
Port | Qingdao or according to requirement |
Delivery time | Normally in 7-35 days, according to quantity |
MOQ | 500kgs for each specification |
Mark | According to customer’s requirement |
OEM | Available |
Product features
Anchored to cracked concrete for the highest safety requirements, resistant to shock and impact loads.
It has a very high load carrying capacity and the anchoring effect is comparable to that of the embedded part.
Smaller torque can be loaded with a tight, fully built-in mechanical lock effect.
Adapt to variable anchor depth and variable fixture thickness.
No expansion stress, low initial stress applied to the concrete substrate, suitable for small margins and small spacing.
Installation
1. First drill with ordinary impact drill according to the specifications of the anchor to be installed to determine the diameter and depth of the drill.
2. Use a reaming drill bit for secondary reaming.
3. Use manual pump or pneumatic pump to clear the hole, the hole must be cleaned.
4. Tighten the components before installation. Make sure there is no looseness and then insert the anchor into the forming hole.
5. Use a clamp on the bolt to clamp the bolt to ensure that the screw does not rotate. Use a torque wrench to tighten the nut.
6. Remove the clamp, loosen the nut, install the connector to be fixed, and use a torque wrench to apply the torque according to the specifications of the anchor bolt. The installation is complete.
Packaging Details:
A. Bulk in cartons(≤25KG)on wood pallet 36CTN/wood Pallet
B. Box + Carton + wood pallet , carton≤ 18kg , 48CTN/wood Pallet
C. According to customer special demand.
