Tee Nut
- NEWSTARWDH
- CHINA
- 7-35 DAYS
- 3000 TONS
Product name: Tee Nut
Material: Carbon Steel, Alloy Steel, Stainless Steel
Standard: DIN1624
OEM: Available
Thread: M, UNC, UNF
Finish: Black Oxide, Zinc Plated(Clear/Blue/Yellow/Black),H.D.G , Y.Z.P ,Plain, Nickel, Chrome.
Tee Nut
T nut, or tee nut (also known as a blind nut,[1] which can however also refer to a rivet nut or an insert nut, and likewise drive-in nut[2]) is a type of nut used to fasten a wood, particle or composite materials workpiece, leaving a flush surface.
It has a long, thin body and a flange at one end, resembling a T in profile. The flanges of T-nuts often have hooks or serrations on the prongs that dig into a wooden work piece as the bolt is tightened from the opposite side of the piece, providing better retention.
In 1969, the first four-prong T-nut with an eight-sided base was patented. Unlike standard round base T-nuts, eight-sided T-nuts can be fed efficiently and reliably via machine. The eight-sided T-nut base has become the standard configuration for T-nuts inserted by machine
Product Parameters
Product name: Tee Nut
Material: Carbon Steel, Alloy Steel, Stainless Steel
Standard: DIN1624
Measurement system: INCH, Metric
Size: 1/4”-3” M6 – M52
Grade / Class: class 4, 6
Thread: M, UNC, UNF
Finish: Black Oxide, Zinc Plated(Clear/Blue/Yellow/Black),H.D.G , Y.Z.P ,Plain, Nickel, Chrome.
Description
Product name | Tee Nut |
Place of origin | China(Mainland) |
Brand Name | NEWSTARWDH |
Port | Qingdao or according to requirement |
Delivery time | Normally in 7-35 days, according to quantity |
MOQ | 500kgs for each specification |
Mark | According to customer’s requirement |
Our advantage: | One-stop shopping; OEM |
The Tee Nut is also called the four-corner nail. The furniture embedded nut is one kind of furniture nut which is stronger than the general wood insert nut. The Tee Nut are symmetrically distributed, and the claw nail effectively buckles the wooden board. There are metric thread and English thread. M4-M10 metric inch stock. four claw nut is widely used in furniture installation. Especially on the sofa. During the installation, the nut will be rotated due to various reasons, resulting in difficulty in installation. The Tee Nut is fixed on the wooden board by the claw nail, effectively solving the defect of the old nut.
The Tee Nut is generally embedded in the furniture wood for assembly with the furniture components. The furniture factory usually pre-embeds the four claw nut when the furniture leaves the factory. Therefore, the Tee Nut can not be disassembled and used in the hands of the customer, so the selection is made. The four claw nut is particularly important, and the occurrence of defective products often leads to the failure of the entire set of furniture. The installation of a small four claw nut cannot be ignored.
The four claw nut is divided into a full-tooth four-prong nut. The half-tooth four-claw nut is installed in two ways. The full-tooth four-claw nut is generally directly knocked into the wooden board and bolted to the lock installation.
Uses: four claw nails. Four claw nuts. Mainly used for furniture connection, office swivel chair, sports equipment;
The four claw nut is used for fastening and locking; the scope of use: all kinds of household appliances, office appliances, toys, stoves, furniture, electric bicycles, scooters, skates, sports equipment, luggage and electronic instruments, etc. Manufacturing Industry.
