Double ended studs processing and main applications
Double ended studs are a relatively common type of bolt in fasteners and play a very large role in many places. Today, I will talk about the processing steps and main applications of the Double ended studs bolts, and hope to help everyone.
Double ended studs processing
The Double ended studs processing mainly has the following processes: firstly, the material needs to be pulled, and the material is pulled out by the pulling machine. After this process, the next process can be carried out, and the next process is to use the cutting machine to pull out. The straight long material is cut to the length required by the customer according to the customer's requirements, which completes the second process.
The third process is to put the cut short material on the thread rolling machine and roll out the thread; the ordinary Double ended studs bolt is processed here, of course, if other requirements are required, other processes are needed.
Main application of Double ended studs bolt
1. The Double ended studs bolt is used in the main body for large equipment, and accessories need to be installed. For example, sight glass, mechanical seal seat, deceleration frame, etc., the Double ended studs bolt used at this time, one end is screwed into the main body, and the other end is equipped with a nut after the attachment is attached. Since the attachment is frequently disassembled, the main body is directly connected by bolts. When the accessories are attached, the main body screws may wear or be damaged for a long time, and it is convenient to replace them with Double ended studs bolts.
2. For the thickness of the connecting body, when the bolt length is very long, the Double ended studs bolt will be used. In the actual work of Double ended studs bolt connection, the external load has vibration, change, high temperature creep of the material, etc., which will reduce the friction force. The positive pressure in the thread pair disappears at a certain moment, and the friction force is zero, thus loosening the thread connection. If it is repeated, the threaded joint will loosen and fail. Therefore, it is necessary to prevent loosening, otherwise it will affect normal work and cause accidents.
The above is about the Double ended studs processing process and the main application introduction. I hope everyone can understand the processing steps and main applications of the Double ended studs bolt and it will help everyone.
